Biodegradable starch-based filaments pair seamlessly with reusable spools for a greener 3D printing experience.
FIlament
Anycubic PETG 1kg - Refill
rate_review Be the first to review
NPR
2,600
alarm
Promo Ends In: 00:00:00
Out of Stock
Select Color
Quantity
compare_arrows
Compare with FIlament
1
Ecofriendly & Budget-friendly
Vibrant Colors
PETG filaments offer exceptional luster and color saturation.
Filament Performance Comparison
Durable & Impact-resist
PETG combines the PLA's ease of printing with the toughness of ABS. Models maintain structural integrity even when dropped or under stress. Making it an excellent choice for toys, chassis, and mechanical prototypes.
Water-resist & Weather-resist
The PETG filaments offer excellent water/weather resistance for all outdoor applications. Preserving the model's original luster and texture over time.
Chemical-resist
The PETG filaments resist chemical corrosion from gasoline, soap, detergent, perfume, toothpaste, and dozens of other chemical substances.
Product Feature Image
Boosting Efficiency with Intelligent ldentification
The filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
*The intelligent identification feature requires an internet connection and Anycubic-brand intelligent identification-compatible filaments.
Printing Guide
You must dry PETG filaments before printing and store them in a moisture-controlled environment to prevent air bubbles during printing.
Filament Installation
1. Label the Filament
Remove both stickers and both chips. (if present.) Install new chip stickers onto both flanges.
Remove both stickers and both chips. (if present.) Install new chip stickers onto both flanges.
2. Load the Filament
Open the spool, align the filament with the latch, and snap it into place.
Open the spool, align the filament with the latch, and snap it into place.
3. Locking the Spool
Close the spool, press firmly, and rotate until you hear a “click," confirming it's locked.
Close the spool, press firmly, and rotate until you hear a “click," confirming it's locked.
4. Prepare the Filament
Once the spool is locked, remove the bonding strap and thread the filament into the spool hole.
Once the spool is locked, remove the bonding strap and thread the filament into the spool hole.
Model Display
Technical Specifications
Detailed hardware & material parameters
| Item | Specification |
|---|---|
| General | |
| Brand | ANYCUBIC |
| Category | FIlament |
| Preparations | |
| Dry Out Before Use | Required |
| Drying Condition | 55-65 °C, 6-8 h |
| Ace Compatibility | Compatible |
| Nozzle Size | Recommended 0.2 mm or above |
| Printing Parameters | |
| Printing Temperature | 230-250 ℃ |
| Heated Bed Temperature | 60-70 ℃ |
| Recommended Printing Speed | 50-250 mm/s |
| Maximum Volume Speed (Flow Rate) | 12 mm³/s |
| Physical Properties | |
| Density | 1.23 g/cm³ |
| Melt Index | 25±3 g/10 min (250℃/2.16kg) |
| Melting Point Temperature | 130 ℃ |
| Vicat Softening Temperature | 72 ℃ |
| Heat Deflection Temperature (0.45Mpa) | 69 ℃ |
| Mechanical Properties | |
| Young's Modulus | 1850±100 Mpa |
| Tensile Strength | 52±1 Mpa |
| Elongation At Break | 13±1% |
| Bending Modulus | 2000±50 Mpa |
| Bending Strength | 80±2 MPa |
| Lzod Lmpact Strength (X Y) | 45±2 kJ/m² |
| Tensile Strength (Z) | 31±3 MPa |
| Filament Characteristic | |
| Filament Type | General filaments |
| Recommend To Print | Toys, decorative parts, and fandom |
| Intelligent Identification | Supported |
| Reusable Filament Spool | Supported |
Customer Reviews
rate_review
No reviews yet
Be the first to share your experience!
Frequently Asked Questions
How do I get warranty & technical support?
All products sold by Blanc include 1-year official hardware warranty and lifetime technical assistance via our support ticket portal.
What is the shipping time within Nepal?
Orders inside Kathmandu Valley are delivered within 24 hours. Outside valley orders take 2-3 business days via express courier.
Is assembly required upon unboxing?
Printers and accessories arrive pre-calibrated or semi-assembled with clear quick-start guides for 15-minute setup.